SDS-Plus Flat Chisel

SDS-Plus Flat Chisel (234.18.011)

FEATURES

• SDS-Plus Flat Chisel
  

SPECIFICATION

Length	250 mm
Width	20 mm
Quantity	1 pc

Basic Information for Removal :

1. Every chisel comes with 150 years experience in manufacturing expertise, we know what it takes to make the best chisel. A high quality chisel needs to withstand the daily routine of breaking and demolition on the worksite, this demands a chisel with a low wear rate, impact strength and elasticity to have a low risk of breaking.
2. With these objectives in mind great attention is placed on sourcing the correct raw materials and to use the most up to date manufacturing techniques.
3. For the base material a specifically defined alloy steel is chosen, then each chisel is crafted individually through the production process of forging, sharpening, hardening, tempering and finishing.
4. The chisels are precision formed using traditional forging skills coupled with sophisticated machinery for the specific tip design.
5. The heat treatment process is totally enclosed and computer controlled ensuring consistent results, this guarantees that the complete chisel is hardened throughout to 55 HRC. The tempering operation creates a uniform hardened surface across the complete chisel to give it impact strength, more wear resistance and the required elasticity.
6. The chisels then go through the final finishing process which gives the chisel a smooth grain flow surface and a special corrosion resistant treatment.
7. Finally for identification purposes the Milwaukee logo is laser marked on the chisel.
8. To achieve long service life all our chisels can be re-sharpened time and time again.
9. These chisels stand for 100% quality – Made in Germany.

Picture Description  :

1. Convex angle designed tip for better penetration less binding and easier re-sharpening.
2. A strong and shock absorbing body made from premium quality alloy steel.
3. The reception is machined to precise tolerances ensuring less wear on the chisel and power tool.
4. Chamfered ends to prevent cracking and fractures.
5. The striking end is machined flat so that 100% of the blow energy is transferred to the tip.

Maintenance Tips :

1. Grease the reception regularly.
2. Keep receptions clean from dust.
3. Do not exert excessive side pressure on the chisel. Do not use as a crowbar.